Exiting the Summary Buffer
==========================

   Exiting from the summary buffer will normally update all info on the
group and return you to the group buffer.

`Z Z'
`q'
     Exit the current group and update all information on the group
     (`gnus-summary-exit'). `gnus-summary-prepare-exit-hook' is called
     before doing much of the exiting, and calls
     `gnus-summary-expire-articles' by default.
     `gnus-summary-exit-hook' is called after finishing the exiting
     process.

`Z E'
`Q'
     Exit the current group without updating any information on the
     group (`gnus-summary-exit-no-update').

`Z c'
`c'
     Mark all unticked articles in the group as read and then exit
     (`gnus-summary-catchup-and-exit').

`Z C'
     Mark all articles, even the ticked ones, as read and then exit
     (`gnus-summary-catchup-all-and-exit').

`Z n'
     Mark all articles as read and go to the next group
     (`gnus-summary-catchup-and-goto-next-group').

`Z R'
     Exit this group, and then enter it again
     (`gnus-summary-reselect-current-group').  If given a prefix, select
     all articles, both read and unread.

`Z G'
`M-g'
     Exit the group, check for new articles in the group, and select the
     group (`gnus-summary-rescan-group').  If given a prefix, select all
     articles, both read and unread.

`Z N'
     Exit the group and go to the next group
     (`gnus-summary-next-group').

`Z P'
     Exit the group and go to the previous group
     (`gnus-summary-prev-group').

   `gnus-exit-group-hook' is called when you exit the current group.

   If you're in the habit of exiting groups, and then changing your mind
about it, you might set `gnus-kill-summary-on-exit' to `nil'.  If you
do that, Gnus won't kill the summary buffer when you exit it.  (Quelle
surprise!)  Instead it will change the name of the buffer to something
like `*Dead Summary ... *' and install a minor mode called
`gnus-dead-summary-mode'.  Now, if you switch back to this buffer,
you'll find that all keys are mapped to a function called
`gnus-summary-wake-up-the-dead'.  So tapping any keys in a dead summary
buffer will result in a live, normal summary buffer.

   There will never be more than one dead summary buffer at any one
time.

   The data on the current group will be updated (which articles you
have read, which articles you have replied to, etc.) when you exit the
summary buffer.  If the `gnus-use-cross-reference' variable is `t'
(which is the default), articles that are cross-referenced to this
group and are marked as read, will also be marked as read in the other
subscribed groups they were cross-posted to.  If this variable is
neither `nil' nor `t', the article will be marked as read in both
subscribed and unsubscribed groups.

   Marking cross-posted articles as read ensures that you'll never have
to read the same article more than once.  Unless, of course, somebody
has posted it to several groups separately.  Posting the same article to
several groups (not cross-posting) is called "spamming", and you are by
law required to send nasty-grams to anyone who perpetrates such a
heinous crime.

   Remember: Cross-posting is kinda ok, but posting the same article
separately to several groups is not.  Massive cross-posting (aka.
"velveeta") is to be avoided.

   One thing that may cause Gnus to not do the cross-posting thing
correctly is if you use an NNTP server that supports XOVER (which is
very nice, because it speeds things up considerably) which does not
include the `Xref' header in its NOV lines.  This is Evil, but all too
common, alas, alack.  Gnus tries to Do The Right Thing even with XOVER
by registering the `Xref' lines of all articles you actually read, but
if you kill the articles, or just mark them as read without reading
them, Gnus will not get a chance to snoop the `Xref' lines out of these
articles, and will be unable to use the cross reference mechanism.

   To check whether your NNTP server includes the `Xref' header in its
overview files, try `telnet your.nntp.server nntp', `MODE READER' on
`inn' servers, and then say `LIST overview.fmt'.  This may not work,
but if it does, and the last line you get does not read `Xref:full',
then you should shout and whine at your news admin until she includes
the `Xref' header in the overview files.

   If you want Gnus to get the `Xref's right all the time, you have to
set `gnus-nov-is-evil' to `t', which slows things down considerably.

   C'est la vie.